* From the Department of Energy website with permission 

Trigeneration Technologies, LLC. is a privately held company that was founded by two of the board members of the Renewable Energy Institute.  We assist in the optimization of bulk power systems by engineering, developing, installing, owning and operating highly efficient cogeneration and trigeneration energy systems. 

Our specialty is both both cogeneration and trigeneration energy systems. There is probably not a better, more cost-effective "demand side management" method for reducing the energy expenses for commercial businesses.

We  manufacture/package, sell and install cogeneration and trigeneration energy systems that approach 100% net system efficiency. This means our energy systems utilize nearly 100% of the fuel in the form of power (electricity) and hot water and/or steam with our cogeneration energy systems and cooling, heating and power (electricity) with our trigeneration energy systems - that our customers use "onsite" in their buildings, restaurants, health clubs, hotels, casinos, office buildings, hospitals and many other types of commercial buildings, facilities and plants.  

For qualified clients, we will build-design-finance-own-operate and maintain our cogeneration or trigeneration energy systems.

What is "Trigeneration"?

Trigeneration is the simultaneous production of three forms of energy - typically, Cooling, Heating and Power - from only one fuel input. Put another way, our trigeneration power plants produce three different types of energy for the price of one.  

Our company's trigeneration energy systems reach overall system efficiencies of 86% to 93%.  Typical "central" power plants, that do not need the heat generated from the combustion and power generation process, are only about 33% efficient.  

Trigeneration Diagram & Description
Trigeneration Power Plants' Have the Highest System Efficiencies and are 
About 300 % More Efficient than Typical Central Power Plants

Trigeneration plants are installed at locations that can benefit from all three forms of energy.  These types of installations that install trigeneration energy systems are called "onsite power generation" also referred to as "decentralized energy."   

One of our company's principal's first experience with the design and development of a trigeneration power plant was the trigeneration power plant installation at Rice University in 1987 where our trigeneration development team started out by conducting a "cogeneration" feasibility study.  We installed a 4.0 MW Ruston gas turbine for the power plant.  Rice University selected an EPC company that installed the trigeneration power plant, along with waste heat recovery boilers and absorption chillers. A "waste heat recovery boiler" captures the heat from the exhaust of the gas turbine.  From there, the recovered energy was converted to chilled water - originally from (3) Hitachi Absorption Chillers - 2 were rated at 1,000 tons each, and the third Hitachi Absorption Chiller was rated at 1,500 tons. The Hitachi absorption chillers were replaced shortly after their installation by the EPC company.  The first trigeneration plant at Rice University was so successful, they added a second 5.0 MW trigeneration plant so today, Rice University is now generating about 9.0 MW of electricity, and also producing the cooling and heating the university needs from the trigeneration plant and circulating the trigeneration energy around its campus.

Trigeneration Chart
Trigeneration's "Super-Efficiency" compared 
with other competing technologies
As you can see, there is No Competition for Trigeneration!

Our trigeneration power plants are the ideal onsite power and energy solution for customers that include:  Data Centers, Hospitals, Universities, Airports, Central Plants, Colleges & Universities, Dairies, Server Farms, District Heating & Cooling Plants, Food Processing Plants, Golf/Country Clubs, Government Buildings, Grocery Stores, Hotels, Manufacturing Plants, Nursing Homes, Office Buildings / Campuses, Radio Stations, Refrigerated Warehouses, Resorts, Restaurants, Schools, Server Farms, Shopping Centers, Supermarkets, Television Stations, Theatres and Military Bases.

We partner and collaborate with other forward thinking companies and communities that are interested in changing the outdated power and energy model of the past - inefficient and highly-polluting central power plants that average 33% efficiency - to a new paradigm and model for the future -  community-based cogeneration and trigeneration energy systems at more than 90% efficiency - and therefore provides power and energy at lower prices while significantly reducing and even eliminating typical power plant emissions and greenhouse gas emissions.  

Call (832) 758 - 0027 for more information about community-based cogeneration and trigeneration energy systems or about making your community, hospital, university or other commercial facility a model for the future.

We presently contract the packaging of our new trigeneration energy systems by a 3rd party/supplier but plan to build a new trigeneration manufacturing plant - near Houston, Texas where we will be able to significantly increase our trigeneration power plant production.

At about 86% to 93% net system efficiency, our trigeneration power plants are about 300% more efficient at providing energy than your current electric utility. That's because the typical electric utility's power plants are only about 33% efficient - they waste 2/3 of the fuel in generating electricity in the enormous amount of waste heat energy that they exhaust through their smokestacks.

Trigeneration is defined as the simultaneous production of three energies: cooling, heating and power.  Our trigeneration energy systems use the same amount of fuel in producing three energies that would normally only produce just one type of energy. This means our customers that have our trigeneration power plants have significantly lower energy expenses, and a lower carbon footprint.

Our smallest trigeneration power plant "basic" power plant is a 200 kW trigeneration system. 

All of our trigeneration power plants can produce 42 degree F. chilled water (with a 20 degree chilled water option) as well as steam and hot water while generating at least 200 kW of power. We can build trigeneration power plants up to 10 MW and with system efficiencies approaching 100%.

Read more about our Trigeneration Power Plants on our Specifications page.

Not sure what size trigeneration power plant to order or whether trigeneration is right for your business?

We can help!

Not sure what size trigeneration power plant to order or whether trigeneration is right for your business?

We can help as we offer three types of Trigeneration Feasibility Reviews & Studies!

Our Trigeneration Feasibility will help you make a decision whether one of our trigeneration power plants are right for your facility.

Trigeneration Feasibility Study and Analysis

Provides a solid basis for moving a potential renewable energy project forward.  The cost for this depends on the type, location, amount of time we require, and any additional requirements that may be included by the client. 

Generally, a trigeneration feasibility study a good option for clients considering trigeneration that need a trigeneration energy system that is over 1.0 MW and up to about 3.0 MW.

The time required to complete the study is about 90 to 120 days, on average. 

The final study we deliver is usually the basis for the customer to obtain a loan, power purchase agreement, energy services agreement or placing an order with us.

To start a Trigeneration Preliminary Study and Analysis, we require a 50% cash payment of the study cost plus a refundable deposit for our reimbursable expenses.

Trigeneration Detailed Concept, Engineering and Design Analysis

The detailed engineering design is a good option for clients that would need a trigeneration energy system with an estimated trigeneration energy system over 3.0 MW and above. In a detailed engineering design, the trigeneration energy system is conceived, designed and engineered as a custom fit and optimized energy solution for your specific facility. 

Final result is usually ready for a company to start construction. A detailed engineering design can take from 4 months to 6 months to complete. The fee will generally run as a percentage of the total installed cost of the trigeneration energy system, and generally costs anywhere from 5% to 15% of the overall cost of the project.

To start a detailed trigeneration engineering design, we require a 50% cash payment of the total fee plus a refundable deposit for our reimbursable expenses.

Our trigeneration feasibility studies and engineering design are led by our licensed engineers.  Our goal is to help you determine whether your renewable energy is viable, identify the merits of your proposed renewable energy project, identify weak points, provide our recommended course of action, as well as our recommendations for products and equipment that need further review or consideration.  Our Feasibility Studies are an excellent "foundation" for building your next renewable energy project.

If you order your new trigeneration power plant from us within 30 days of the date of delivery of our Trigeneration Feasibility Review or Study, we will reduce the cost of your new trigeneration power plant by half the cost of the study and apply the fee to the purchase.

Trigeneration is a technology whose time as come! Particularly for commercial clients who want to decrease their energy expenses and carbon footprint, while increasing energy efficiency and profits. This is possible as our trigeneration power plants surpass 90% net system efficiency. 

This is possible through our trigeneration power plants that surpass 90% system efficiency for our clients that need cooling, heating and power - which covers about 99% of all commercial buildings and companies.

While most new trigeneration power plants are capable of being fueled with clean natural gas, we are dedicated to ending the use of fossil fuels by providing renewable energy and renewable fuels such as B100 Biodiesel or Biomethane.  Simultaneously, we are focused on reducing and eliminating greenhouse gas emissions and carbon dioxide emissions.

In association with the Renewable Energy Institute, affiliate companies and investors, we provide "turnkey" trigeneration power plant development services that range from initial Engineering Feasibility & Economic Analysis Studies through project installation, start-up and commissioning, Operations & Maintenance, and Long Term Service Agreements for the lifetime of our systems.

Trigeneration Technologies' trigeneration energy systems' net system's efficiencies surpass any potential competitor.  We guarantee our standard trigeneration power plants will exceed 90% net system efficiency. 

Our trigeneration plants can use renewable fuels such as Biomethane, B100 Biodiesel or Dimethyl Ether, instead of fossil fuels to run them. We also offer an optional selective catalytic reduction technology that takes NOx down to "non-detect" without the use of ammonia or urea on our new trigeneration plants.

Our range of services (some provided by affiliate companies or manufacturing suppliers) include:

• Design/engineering, Engineering Feasibility and Economic Analysis Studies

• Legal

• Energy Service Agreements

• Power Purchase Agreements

• Build

• Finance

• Own

• Operate

• Maintain

• Long Term Service Agreements

Our renewable energy projects generate Renewable Energy Credit or Certified Emission Reduction credits, which provide an additional income stream from our projects.

"The Trigeneration Experts" - the ONLY Company that Builds Integrated Trigeneration Plants on a Single Skid with Effective System Efficiencies that Exceed 90%.  Our Optional SCR System Reduces Nitrogen Oxides To "Non-Detect" Without Ammonia or Urea

Our small footprint Trigeneration Plants measurements are: 15' wide by 15' in height by and 55' in length

We Can Design, Build, and Install Your New Trigeneration Power Plant and have it online in less than 130 - 150 days!

Our "Turnkey" Integrated Trigeneration Energy Systems are Available from 60 kW to over 10 MW with system efficiencies > 90% While Providing Practically-free Heating (and Cooling with Trigeneration) and generating power for commercial and industrial customers for as low as 4 cents/kW!  We are the only company that builds, fabricates, packages (on a single skid) and "integrates" Trigeneration power plants.

Standard Trigeneration Power Plants sizes in kW:

                          200 kW                    450 kW                   750 kW          
                          250 kW                    500 kW                   800 kW
                          300 kW                    600 kW                   850 kW
                          400 kW                    700 kW                   900 kW

Standard Cogeneration and Trigeneration Power Plants sizes in MW:

           1 MW          2 MW          3 MW          4 MW          5 MW

We can package any combination of standard size plants to come up with your optimum size system. Our standard and customized Trigeneration power plants use the leading brands of reciprocating engines or turbines and include our proprietary Waste Heat Recovery technologies that help us achieve system efficiencies greater than 90% and effective heat rates as low as 4050 btu's/kW.  We provide both standard and customized Trigeneration plants that meet our customer's most stringent economic and environmental requirements.

Our cogeneration and trigeneration energy systems can be fueled with renewable fuels for even greater environmental and economic savings! These fuels or energy sources include: Biomethane, B100 Biodiesel, Dimethyl-Ether, Synthesis Gas and natural gas. Net system efficiencies of our Trigeneration power plants are now exceeding 90% with up to 95% lower emissions when using Biomethane, B100 Biodiesel, Dimethyl-Ether or Synthesis Gas as the fuel for Trigeneration power plants.

For pricing and delivery information on our Cogeneration, Trigeneration, Biomethane or B100 Biodiesel power plants, call (832) 758 - 0027 or send an email with your project's requirements to:  info@trigeneration.com

Read more about our Trigeneration Power Plants on our Specifications page.

Our New "Integrated" Trigeneration Plants Have 
Very High Efficiencies & Low Fuel Costs

The Effective Heat Rate is Approximately 
4050 btu/kW & System Efficiency is 92%

Pictures of our latest Cogeneration Plant Presently Being Built for New Customer.  This Cogeneration Plant is Rated at 900 kW and Features (2) Natural Gas Engines @ 450 kW each on one Skid.

Our onsite trigeneration power and energy system can be an ideal solution for customers wanting increased power reliability and decreased energy and environmental costs.  A few of the types of buildings and businesses that would benefit from an onsite trigeneration plant include the following:

Airports

Casinos

Central Plants

Colleges & Universities

Dairies

Data Centers & Server Farms 

District Heating & Cooling plants

Food Processing Plants

Golf/Country Clubs

Government Buildings and Facilities 

Grocery Stores

Hospitals 

Hotels

Manufacturing Plants

Military Bases

Nursing Homes 

Office Buildings / Campuses

Radio Stations

Refrigerated Warehouses 

Resorts 

Restaurants 

Schools

Server Farms

Shopping centers 

Supermarkets 

Television Stations

Theatres

For pricing and delivery information on our Cogeneration or Trigeneration power plants, call (832) 758 - 0027 or send an email with your goals, objectives and requirements to:  info@trigeneration.com

We would be interested in meeting with potential joint venture partners who are as committed and passionate as we are about making a difference in the world by assisting us with the capital we need to begin producing our +/- 90% efficient cogeneration and trigeneration energy systems which will soon be located on the roof (or next to the building) of thousands of commercial business - such as fast food restaurants, restaurants, convenience stores, office buildings, medical/dental professional buildings, supermarkets/grocery stores, hospitals, casinos, universities, dairies, data centers and server farms.

Equity positions now available for qualified joint venture partners in multiple trigeneration projects we are seeking to develop with leading Fortune 1000 companies.  Our joint venture equity partners will assist us with manufacturing our cogeneration or trigeneration plants and start installing them on the roof-tops or next to our customer's facilities - pending orders from hospitals and restaurants who have agreed to purchase all of our energy generated from our trigeneration plants through our Energy Services Agreement (similar to a Power Purchase Agreement except in the case of an Energy Services Agreement, we also sell the hot water/steam and chilled water, in addition to the electricity our trigeneration plants generate).

Our trigeneration plants will;

* forever change the way that energy is generated and used.

* will be fueled with "green fuels" such as; Biomethane, B100 Biodiesel, Synthesis Gas (generated from biomass feedstock and "converted" through Biomass Gasification plants), Dimethyl Ether or Solar Energy.

* eliminate or greatly reduce our customer's electric demand charges.

* significantly increase the amount of renewable energy used in the U.S. and around the world when renewable fuels such as Biomethane, B100 Biodiesel, Synthesis Gas or Dimethyl Ether

* stop/reverse climate change by reducing greenhouse gas emissions and carbon dioxide emissions.

* reduce and eventually eliminate the use of "fossil fuels."

* reduce the need for inefficient and expensive central power plants owned by utility companies. 

* promote energy independence.

* end America's dependence on oil from OPEC and other countries in the Middle-East, Venezuela and end our need for importing natural gas from Russia.

Prospective joint venture partners are invited to send an introductory email regarding your interests in renewable energy along with your financial abilities and expectations to:  info@Trigeneration.com

____________________________________________________________________________________

EPA Moves Closer To Regulating Greenhouse Gas Emissions

April 18, 2009
By: Webmaster 
www.GreenhouseGasEmissions.com

WASHINGTON — In a major reversal of years of government policy regarding Greenhouse Gas Emissions, the Environmental Protection Agency today proposed regulating Greenhouse Gas Emissions to combat and reverse global warming and climate change.

"In both magnitude and probability, climate change is an enormous problem" said E.P.A's Administrator Lisa Jackson in their 130 page report on Greenhouse Gas Emissions. She found that projected levels of Greenhouse Gas Emissions "endanger the public health and welfare of current and future generations."

The finding came two years after the Supreme Court ruled the EPA had the authority to regulate Greenhouse Gas Emissions under the Clean Air Act.

"Renewable Energy Technologies such as; Anaerobic Digesters, Biomethane, Concentrating Solar Power, Geothermal Power Plants are "carbon neutral energy" technologies, and generate no new Greenhouse Gas Emissions.  Power generated from Biomass Gasification power plants, are "carbon negative energy" solutions which actually remove carbon dioxide emissions from the atmosphere, according to the Founder and Chairman of the Institute for Climate Solutions, and the Renewable Energy Institute's Mont Goodell. 

For more information, see the Greenhouse Gas Emissions website at:  www.GreenhouseGasEmissions.com

____________________________________________________________________________________

^{For Pricing and Delivery information on our Vapor Recovery Units, Cogeneration or Trigeneration Power Plants, or for Biogas/Biomethane Consulting, Engineering or Project Development Services, call (832) 758 - 0027  or send email to: info@VaporRecoveryUnit.com}

info@RenewableEnergyInstitute.org

^{Vapor Recovery Units
www.VaporRecoveryUnits.com}

^{2007 - 2009 
© All Rights Reserved}

^{Oil and Natural Gas Investments
www.OilAndNaturalGasInvestments.com}

^{Email:  info@VaporRecoveryUnits.com}

^{Tel.  (832) 758 - 0027}